The first step in creating fluted moldings is to prepare the material. You will need a piece of wood that is at least 2 inches thick and 2 inches wider than the desired molding. This will allow enough material to make the flutes.

Next, mark the center line of the wood using a straightedge and a pencil. This line will be used as a reference point for the CNC machine.

Setting Up CNC Mastercam V9: Once the material is prepared, it is time to set up CNC Mastercam V9. First, open the program and create a new file. Then, import the design file for the fluted molding. Make sure that the design is to scale and centered on the material.

Next, set up the toolpaths. Choose a router bit that is appropriate for the size of the flutes and the hardness of the wood. Then, set the depth of cut and the spacing between the flutes. It is important to test the toolpath on a scrap piece of wood before making the final cuts.

Making the Cuts: With the material and the program set up, it is time to make the cuts. Place the wood onto the CNC machine and secure it in place. Make sure that the router bit is properly installed and that the machine is turned on.

Start the program and watch as the CNC machine creates the flutes in the wood. It is important to keep a close eye on the machine throughout the cutting process to ensure that everything is going smoothly.

Finishing Touches: Once the cuts are complete, remove the wood from the CNC machine and inspect it for any imperfections. Sand the molding lightly to remove any rough edges or burrs.

Finally, apply a finish of your choice to the fluted moulding. This could be a stain, paint, or clear coat. The finish will protect the wood and enhance the beauty of the fluted molding.

Conclusion: Making fluted moldings using CNC Mastercam V9 is a precise and efficient way to add texture and depth to your woodworking projects. By following these steps, you can create stunning fluted moldings that are sure to impress. With a little practice, you’ll be making fluted moldings like a pro in no time!

Let’s continue Learning together, Happy programming! Membership

• Uncategorized